SINGLE WELT CORD FOOT HV GRP 1-8

Snap on the Single Welt Cord Foot to easily, quickly, accurately 
make and insert welted cording into your upholstered and home 
dec projects. Whether the welt cord is purchased pre-covered or 
you cover it yourself, this accessory foot gives you a professional 
finish. It sews like the piping foot but is designed for larger sizes 
of cording.
To cover welt cording:
1. Use ¼" (6 mm) Cotton Filler Cord. Cut strips of bias or cross grain fabric wide enough to cover the cord plus seam allowance.
2. Snap on the Single Welt Cord Foot. Select center needle straight stitch, stitch length 3.
3. Place the cording on the wrong side of the fabric strip and wrap the fabric strip around the cord.

4. Place the fabric and cord under the Single Welt Cord Foot with the cording in the 
groove on the underside of the foot.
5. Sew to cover the cording with the fabric. 
To stitch covered welt cord into a seam:
1. Snap on the Single Welt Cord Foot. Select center needle position straight stitch, stitch 
length 3.
2. Place the covered welt cord on the right side of the fabric along the seam line. Place it 
under the Single Welt Cord Foot with the welt cord in the groove of the foot. Stitch the 
welt cord to the fabric. Clip the seam allowance of the welt cord at curves and corners.
3. Place the second piece of fabric right sides together with the first. The welt cord will be between the two layers. Place the welt cord in the groove and stitch with the first stitching line up. Touch the width to adjust the needle position slightly to the right to cover the first stitching.

Product Number 412627045

Fits 1,2,3,4,5,6,7,8

Get in touch with us if you are unsure which foot your machine takes, we can help!